The instrumental input is based on discrete transistors,
operating in class A. The appliance of FET transistor
enabled the design of a unit, that enriches the signal
with small amount of even, harmonic frequencies,
positively affecting the sound of instruments plugged
directly to SATurAMP. This refers not only to guitars and
basses. SATurAMP works stunningly with digital
synthesizers, adding this warm, analog touch.
The signal path of SATurAMP is minimalistic, and applied
elements are carefully selected with regard to original
sound character signed with Looptrotter. SATurAMP
represents the highest quality sound combined with
original, analog touch.
The SATurAMP is 100% author’s design and has no
equivalents either analog or digital.
SATurAMP in brief:
ü
preamplifier with amplification of 66dB (gain 60dB + 6dB)
ü
gain on operational amplifier, build of discrete elements
ü
gain control without mechanic contacts
ü
smooth regulation of output level with OUTPUT knob
ü
instrument input, Hi-Z, on the front panel (impedance of 1M ohm),
build of discrete elements
ü
original saturation unit adding low order harmonic frequencies,
working also like soft limiter
ü
signal peak indicated with LED
ü
2 LEDs indicating signal saturation level (4% and 8% THD)
ü
3 LEDSs indicating output level
ü
PAD -20 dB
ü
phantom power 48V
ü
polarization switch
ü
high-pass filter with slope of 12db per octave, with selectable
cut-off frequency and characteristic:
ü
60 Hz - Chebychev,
ü
100Hz - Butterworth,
ü
160 Hz - Bessel
ü
MUTE button – muting the preamp output
ü
SOWTER transformer in signal path
ü
100% original design guaranteeing unique, oryginal sound
www.looptrotter.com.pl
www.mjaudiolab.pl
Distribution: MJ AUDIO LAB
S AT
U R
A M P
Contact:
www.looptrotter.com.pl
Distribution:
www.mjadiolab.pl
