Loopcomm LP-7316K User Manual Download

Page: 47 / 83

V3.0.0

e. PPTP

Item

Description

Server IP

Allow user to make a tunnel with remote site directly to secure the data

transmission among the connection. User can use embedded PPTP client

supported by this router to make a VPN connection.

If you select the PPTP support on WAN interface, fill in the IP address for it.

User Name

Fill in the user name and password to login the PPTP server.

Password

Fill in the user name and password to login the PPTP server.

Address Mode

Static:

To configure the IP address information by manually, please fill in the

related setting at below.

Dynamic:

The option allows the machine to get IP address information

automatically from DHCP server on WAN side.

IP Address

Fill in the IP address for WAN interface.

Subnet Mask

Fill in the subnet mask for WAN interface.

Default Gateway

Fill in the default gateway for WAN interface out going data packets.

Operation Mode

Keep Alive:

Keep the PPTP connection all the time. Please also configure the

Redial Period field.

On Demand:

Please configure the Idle Time field. When time is up, the PPTP

connection will disconnect. The connection will re-connect when any outgoing

packet arise.

Manual:

Let user connect the PPTP connection manually.

MAC Clone

Take NIC MAC address of PC on LAN side as the MAC address of WAN

interface.

Summary of Contents for LP-7316K




















































































Search results

Summary of Contents for LP-7316K

Reviews:

Related manuals for LP-7316K

Brands by name

Popular brands

Loopcomm LP-7316K, User Manual

Search results

Summary of Contents for LP-7316K

Reviews:

Related manuals for LP-7316K

Brands by name

Popular brands