LOOP 3D LOOP PRO X, Quick Installation Manual

Page: 26 / 32

26
1
3
2
Go into Filaments tab and enter
the ''Load Filament'' menu. Please follow
the steps precisely not to encounter any
problem. Filament roll placing direction
is important, make sure that the spool
turns clockwise while pushing the filament
through the tube. When it comes to that
step,
make sure you don't press ‘Load
before you stick the filament into the
extruder properly
, it should be grabbed by
gears.
To build surface area,
apply the glue
stick
which is provided with the tool kit
permanantly and without leaving any rises
and gaps.
Plug in your LOOP 3D Printer and the
Material Conditioning Unit, set the Material
Conditioning Unit to the highest setting by
turning the setting knob inside clockwise.
Place the filament hanger rod to the
second step from the front of the Material
Conditioning Unit. Turn the printer on.
Please make sure the filament tube you
attached goes to the very end of the filament
tube adapter between the machine and the
behind of the cabinet. After placing it properly
and locking it, please push it one last time.