-6-
5V 1-2A
3
4
1
1
1
1
1
2
2
2
2
Open the remote control
Close the remote control
Flight preparation and turning the drone on/off
Pairing the remote control with the drone
Charging the remote
control batteries
Attaching the phone holder
Indicator stays constant when
pairing is complete.
*
When you switch on the remote control, the indicator will flash
rapidly for approximately 20 secs to indicate that the remote
control is waiting for a signal. The indicator will then flash slowly to
indicate that pairing mode has been disabled.
!
Remote control
indicator flashes
rapidly
Switch on the remote control Indicator flashes
rapidly -> slowly
Switch off the remote controller
during charging
Charging : red light is on
Finish charging: light is off
2