Look Solutions Cryo-Gate, Operating Manual

Page: 17 / 24

17
4. Operating the Cryo-Gate
4.4.5 IP Configuration
To adjust the IP-address and the Subnet mask for your network, press SETTINGS at
the main screen and in the following Settings 1-screen IP-CONFIG (Fig. 2, line 4).
Fig. 12 IP-Configuration
screen, STATIC active Fig. 13 Screen to adjust the IP-
address and Subnet mask
First select whether you want to use a static network address or a dynamic one (DHCP)
by pressing STATIC or DHCP (Fig. 12, line 4).
If you select DHCP ,
the Cryo-Gate gets an IP-address and a subnet mask from a DHCP-Server or Router
in your network.
If you select STATIC ,
you can type in the IP-address and the subnet mask in the following screen (Fig. 13).
Ask your network administrator if necessary.
– Press CE and type in the address. Save the address with IP ADDRESS SAVE respec-
tively SUBNET MASK SAVE (Fig. 13, line 5), press BACK to get to the previous screen
without saving the values.
For networks, where the IP-address and the subnet mask shall be used with the
ARTNET -standard, press STATIC and then ARTNET (both Fig. 12, line 4).
The IP-address will then be generated from the invariable MAC-address of the Cryo-
Gate and an OEM-Code. The subnet mask will be automatically set to 255.0.0.0.