IP Sharing Router
- 10 -
Chapter 2
Quick Installation Guide
After connecting the router into your network, you should configure it. This chapter describes how to
configure the basic functions of your router. These procedures only take you a few minutes. You can
access the internet via the router immediately after it has been successfully configured.
2.1 Configure PC
In order to communicate with this Router, you have to configure the IP addresses of your computer to
make it compatible with the device.
Note:
The router supports DHCP server and it is enabled as default. Users that configure your IP
address as “
Obtain an IP address automatically”
may skip the following IP configuration instruction.
The default network setting of the device:
IP address:
192.168.1.1
Subnet Mask:
255.255.255.0
DHCP Server
: enable
In the following configuration guide, the IP address “192.168.1.2” is assumed to be your IP address if you
want to specify IP addresses manually. Please DO NOT choose “192.168.1.1” as the IP address. For the
IP address “192.168.1.1“ has been set as the default IP for this device.
The following configuration guide uses windows XP as the presumed operation system.
Procedures to configure IP addresses for your computer
1. If you are in Classic Start menu view, click
Start >
Settings >
Network Connections
.
If you are in Start menu view, click
Start >
Control Panel >
Network Connections.
