5
CHRONOGRAPH – L895
Rally Add function (partial times)
Used for measuring successive events, but not the
intervals between them. Each result is automatically
added to the preceding one. To time the various
stages of a car rally, for example, follow the
procedure below:
• At the start of the first stage, press push-piece
2
:
the chronograph will start.
• At the end of the first stage, press push-piece
2
again: the chronograph will stop.
• Repeat for each stage of the rally.
• At the end of the final stage the chronograph will
show the total time of the rally, in other words, the
accumulated time for all the stages.
• Press push-piece
3
to reset.
Avoid setting the time while the chronograph
function is in use
Setting the time and stop seconds
Pull the crown out to position
2
when the small
seconds hand (situated at
3 o'clock) is at 60. Turn
the crown either way to the desired time display. As
soon as the time is synchronised, push the crown
back into position
1
.
If you have not been wearing your mechanical
watch, it needs to be wound manually through thirty
revolutions or so.
Before each timing operation, the chronograph
hands must be at their start point.
Standard Start – Stop – Reset
function
Timing a single event:
• Press push-piece
2
: the chronograph will start.
• Press push-piece
2
: the chronograph will stop.
• Press push-piece
3
to reset.
Summary of Contents for CHRONOGRAPH L895
Page 1: ...INSTRUCTION MANUAL...
Page 7: ......
