160/200/160P/200P AC/DC Series Machine
www.longevity-inc.com
Air Regulator Assembly to Unit
LONGEVITY® includes an air regulator/filter with your machine. You must attach the bracket to the machine,
and fasten the regulator to the bracket so it looks as pictured
1.
Locate the INLET and OUTLET labeled on the regulator picture above and attach the Air Compressor
to the inlet and the OUTLET to the INLET on Unit with the provided hose to back of the machine,
where shown, and secure it with a hose tie.
2.
Set the air compressor to about 60-75 PSI depending on the thickness of your cut. If you are getting a
poor cut quality, try adjusting the PSI on the regulator to see if the cut quality improves.
3.
Periodically, after long periods of use, you must remove water from the air by pushing the water release
button inward to release water from the water separator section of the regulator.
