www.longer3d.com
28
Curing time
: the exposure time to cure a layer thickness of
photopolymer resin except burn-in range. The default times
are 4000, 6000, 8000ms respectively for curing 25, 50, 100μm
layer thickness. But it needs to add the exposure time, such as
8000 to 12000ms, for the model with fine size.
Burn-in time
: the exposure time for the bottom layers. The
longer the exposure time, the greater the adhesion between
the model and building platform. The default time is 80000ms.
Stable Time
: the time between stop motion of Z axis and LCD
projection. The default time is 1000ms
Burn-in range
: the height that is over cured for increasing the
adhesion between the models and building platform. The
default value is 0.3mm.
Lift Distance1
: the slow motion distance for separation. The
default distance value is
2mm
.
①
②
③
