Instructions
Insert the power cord into the power outlet.
Press the start button
Vacuum will start operating.
To switch off the vacuum,
press the start button again to stop.
The UV lights will be automatically switched on. The UV Light indicators
will be automatically lit.
In order to switch on the dust removal,
tap the dust removal function.
Storage & Maintenance
Daily
Storage.
When the product is not used for long period, please store it in cool &
dry place. Do not put the product under direct sunlight or humid
environment
Maintenance.
Ensure the product is disconnected from the power oulet. Use clean
cloth to wipe the surface of the product with cleant water. Dry it with
dry cloth after wiping.
Dust Compartment
Troubleshooting
Fault/ Problems
Possible Causes
Solutions
Product is not
working
The power supply is
not switched on
Ensure the power is
connected and the
switch is on.
The suction is
weaker
The dust
compartment is full
Clean the dust
compartment.
Suction is blocked or
obstructed
Ensure the suction is
not clogged by any
obstruction
The Light is not
working
The light is
malfunction
Contact Customer
Service for
replacement.
Switch ON/ OFF
Dust Removal
Remove the dust
compartment by pressing
the side handle.
Pull out the filter by pulling the handle of the
compartment.
Empty the dust compartment. If there is lot
dust accumulated in the compartment, you
can wipe it with cloth and water. Wipe it dry
before install back the compartment.
