in accordance with the previous paragraph.
All attempts have been made to make the information in this document complete and accu-
rate. LRS is not responsible for any direct or indirect damages or loss of business resulting
from inaccuracies or omissions. Specifications and other information contained within this
document are subject to change without notice.
Long Range Systems, LLC reserves the right to make changes without further notice to any
products herein. LRS, LLC makes no warranty, representation or guarantee regarding the suit-
ability of its products for any particular purpose, nor does LRS, LLC assume any liability arising
out of the application or use of any product or circuit, and specifically disclaims any and all li-
ability, including without limitation consequential or incidental damages. “Typical” parameters
that may be provided in LRS, LLC data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including
“Typicals”, must be validated for each customer application by customer’s technical experts.
LRS, LLC products are not designed, intended, or authorized for use as components in systems
intended to support or sustain life, or for any other application in which the failure of the LRS,
LLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use LRS, LLC products for any such unintended or unauthorized application,
Buyer shall indemnify and hold LRS, LLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death asso-
ciated with such unintended or unauthorized use, even if such claim alleges that LRS, LLC
was negligent regarding the design or manufacture of the part, device or system.
EU DECLARATION OF CONFORMITY
We, Long Range Systems hereby declare under our sole responsibility that the T9560 paging
transmitters and on-site pagers comply with the essential requirements in the European
RE&TTE Directive 1999/5/EC of the European Parliament of the Council of 9 March 1999 on
radio equipment and telecommunication terminal equipment and the mutual recognition of
their conformity. The following standards were utilized:
ETS 300 224: 1998
EN 301 489-2: 2002
EN61000-3-2: 1998
EN 61000-3-3: 1995
EN 60950: 1992 with A1, A2, & A3.
Long Range Systems
11 T9560 EZ User Manual