Long Range Systems
7
T7400 User Manual
T7400
Long Range Systems
800.437.4996
F1
F2
F3
F4
SETUP
MGR1
MGR2
STAFF
CLEAR
ENTER
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQR
STU
VW
XYZ
[
12
:
00
:
36 am
Guest
#: ---
Keypad Description
Before using the keypad, read the following keypad descriptions.
Note:
As the display changes, the keys may perform different functions.
Initial Power Up and Time Set
1. After the transmitter initializes, the time set menu is shown, enter the current time and press the
ENTER key
Note:
Pressing F1 (EXIT) bypasses this function and sets the time to 12:00am.
2. When the display asks for AM or PM, press the F1 Key for AM or the F4 key for PM. (Note that AM
is right above the F1 key and PM is right above the F4 key). The display shows MM/DD/YY
F Keys
The F (function) keys are
the first row of keys under
the display. The F1 - F4
keys correspond to the
bottom row of text in the
keypad display window.
Number Keys
Keys 1 through 0 enter
numeric data such as the
pager number. In some
modes they will also
enter alpha data.
Setup Key
The Setup key enables
menus when checking or
changing the transmitter’s
programmed settings.
Mgr 1 and Mgr 2 Keys
Mgr1, Mgr2, and Staff
keys are used to page a
manager. Mgr1 and
Mgr2 keys can be as-
signed to a specific pager.
Staff (Pager) Key
The Staff key is used to
temporarily change the
paging function to page
Staff pagers.
Clear Key
The Clear key is used to
clear the input when
paging
a
pager
or
coaster and return to the
Guest paging display or
to restart an input when
programming.
Enter Key
The Enter key is used to
start the paging function,
and to complete pro-
gramming
where
re-
quired.
