10
Basic startup meter Settings
Menu Language Choice
Press the two right hand buttons briefly. You will see the
U
ser
I
nterface language, which you
can change with the UP or DOWN buttons. Accept with OK
Next you will see ...
Meter Bootup routine
1. Activates all digit segments
2. Runs up and down brightness
settings
3. Displays model number and
installed options
4. Displays firmware version
5.Displays calibration audit
number.
6. goes to meter mode
When you switch the meter on, it can run through a summary list of software version number,
installed options, calibration number etc.
You can choose from 3 lists of bootup information to be displayed, the less information you
display, the sooner the meter will be available to operate.
Next you will see ...
Software de-bounce
You can enable a software debounce function for slow pulse rates, to limit pulses to once
every 10 seconds. Select P.DB.0 to disable this function, or P.DB.1 to enable it.
Lockout notes:
Cal Lock switch = OFF when changing. Switch Cal Lock to ON after changing
UI EnG
UI FRA
boot 0
boot 1
boot 2
1. Activates all digit segments
2. Runs up and down brightness
settings
3. Displays model number and
installed options
4. goes to meter mode
1. Goes immediately to meter
mode
pdbnc0
pdbNC1
