background image

On / Off

 – Turns the unit on and off. Press the on/off key once to switch the unit on. Press it again to 

turn the unit off. The power lamp is always on unless the unit is unplugged

Timer

 – This air cooler has a built in 7.5 hour timer. This enables you to pre-set the unit to switch off 

automatically. The display goes: 

0.5 > 1, 0.5+1 =1.5 > 2, 0.5+2 =2.5 > 1+2=3, >0.5+1+2=3.5 

>0.5+1+2+4=7.5 >off

Fan speed

 – HIGH FAN-maximum air circulation. MIDDLE FAN-Moderate air circulation. LOW FAN-Slow 

air circulation

Swing

 – The swing feature provides a continuous side-to-side air circulation. If a fixed direction of air is 

preferred, the louver can be stopped at any position

Mode

 – The mode key allows you to select normal, natural or sleep mode of fan

              

Normal

 – When you press the normal key, the fan speed is running under selected speed

              

Natural

 – When you press the natural key, the fan is random. The fan speed goes as follows:

              

High   Middle   Low   High   Middle  Low   High   Middle   Low alternately

              

Sleep

 – When you press the sleep key, the setting will decrease every 30 minutes except when the speed

              setting is Low

Air Cooler

 – Fill with enough water before pressing this key

Coolant

 – Freeze the coolant bottle before using. Secure it to the thread before putting it in the water

Note

 – Coolant bottle can be re-used by re-freezing

Ice Tank

 – Ice can be put in this container, if necessary

Ionizer

 – This function is to provide fresh air, the function is always turned on when unit is on (This function is for some models 

only)

Maintenance and Cleaning 

Every 2 weeks clean the filters on the unit

 

Turn the unit OFF and remove the plug from the outlet 

Unscrew the tap to drain dirty water out 

Wash in hot soapy water, rinse and shake dry 

Note: Failure to keep air filter clean will result in poor air circulation

Back cover removal and cleaning

 

Turn the unit OFF and remove the plug from the outlet 

Unscrew and then remove back cover. Disconnect the connector before removing back cover 

Never use harsh cleaner, wax or polish on the cabinet 

Clean the filter using liquid dishwashing detergent and warm water 

Rinse thoroughly and dry 

To re-install

Carefully pull down the back cover 

Connect the connector 

Install the screws 

 

London Cool air conditioner rental and sales

This document has been compiled in good faith, but no representation is made or warranty given (either express or implied) as 

to the completeness or accuracy of this information

Reviews: