LONCIN WG6500M-1, Owner'S Manual

Page: 22 / 31

Maintenance of the set
- 18 -
Improper maintenance, or failure to correct a problem before
operation, can cause a malfunction by which you can be hurt or killed. Always
follow the recommended inspection and maintenance and schedules in this
owner’s manual.
1) Engine oil change
Drain the engine oil while the engine has been
Warmed to ensure complete and rapid draining.
① Remove the oil dipstick and screw off the
drain plug to drain the engine oil
②
Reinstall the oil drain plug and tighten it.
③
Refill with the recommended engine oil
and check oil level.
Engine oil volume: 1.1 L
Engine oil may cause skin cancer if repeatedly left in contact with
the skin for prolonged periods. Although the skin cancer does not necessarily
happen, it is still advisable to thoroughly wash the skin that has contacted
engine oil with soap and water after handling engine oil.
For the sake of environment protection, please treat the used engine oil in an
appropriate way. We strongly advise you to store the used engine oil in a sealed
container and take it to the local service station or recycling center for reclamation.
Never throw it in the trash or pour it on the ground or into the ditch.
2)
Air filter maintenance
A dirty air filter will restrict air flow into the carburetor. To prevent carburetor malfunction,
maintain the air filter regularly. Maintain it more frequently when operating the
generator in extremely dusty areas.
Using gasoline or inflammable solvent to clean the filter element
can cause a fire or explosion. Use only soapy water or nonflammable solvent.
Never run the generator without the air filter, or rapid engine wear
will result.
①
Unsnap the air filter cover clips (or butterfly nut), remove the air filter cover and
check the filter element to confirm it’s complete and clean.
②
Wash the element in a solution of household detergent and warm water, or in a
Oil drain plug Dipstick
Upper limit