Check before Operation
- 6 -
4. Check before operation
Routine inspection
z
Observe the leakage of engine oil and fuel.
z
Observe
damage.
z
Check guard cover and cap position, and the tightness of screw, bolt and nut.
Check engine oil
After stalling, place the engine in level position, then check oil level.
1) Pull out the oil ruler and clean it.
2)
Plug in the ruler thoroughly and take it out again to check the oil level.
3)
If the oil level is lower than the low limit, remove the filler cap and fill the recommended
oil till it goes up to the top limit.
4)
After filling, keep in mind to reinstall the ruler and tighten the cap.
When the engine oil level is lower than the safe line, the engine protecting system will
stops the engine automatically. To avoid engine stalling accidentally, check the oil level
before starting the engine each time.
When filling fuel, the fuel level does not exceed shoulder of fuel filter (i.e.
top level).
。
It is recommended to fill lead free petrol, grade No 90 or higher.
When use lead free petrol, carbonized dirt is less, thus it can prolong the service life of
exhaust system.
It is prohibited to use waste fuel, contaminated fuel and fuel mixed with engine oil.
Caution
Caution
