106
18-10-2004
18-10-2004
00
REG. CODE
1-5302-662
MODEL N°
51092
DATE OF ISSUE
REVISION
DATE
ENDORSED
COMPILER TECO/ATI
XI
356
357
359
360
358
DISASSEMBLY/REASSEMBLY
Minimum oil pressure switch - Assembly
Reassemble the oil pressure switch placing a new seal, then tighten it at a torque of 22 Nm (fig. 359÷360)
Flywheel and cooling fan support - Assembly
Reassemble the flywheel onto the crankshaft and then fasten it with the cone and the fastening bolt.
Use tool 981075.414 to lock the flywheel, thus allowing the fastening bolt to be tightened at 180÷200 Nm.
Assemble the cooling fan support onto the flywheel and fasten it by tightening the five screws at 12÷15 Nm (fig. 356).
Starting motor - Assembly
Assemble the starting motor by tightening the three M 8x40 screws at 29 Nm and the two M 6x22 anchoring bracket ones at
12÷15 Nm (fig. 357)
Air shroud, cooling fan – Radiator shroud - Assembly
Fasten the cooling fan shroud to the cover by using the five M 6x20 screws.
Assemble the cooling fan onto its support, paying attention to the correct rotation
direction, and the snap ring with the edge folded towards the outside.
Fasten the fan to the support by using the four screws at a 12÷15 Nm torque.
In the end, assemble the radiator shroud, fasten it by using the six M 6x20 and
the three M 6x25 screws and then tighten them at a 0.8÷10 Nm torque (fig. 358).
Summary of Contents for LDW 422 SERIES
Page 2: ......
