LOMBARDINI MARINE Kohler KDI 1903TCR-MP, Owner'S Manual

Page: 38 / 56

_04
6
38
A
A C
C B B
6.17
6.15
B
B
6.16
A
C A
B
INFORMATION ABOUT REPLACEMENTS
EN
6.8 Disposal and scrapping
• In case of scrapping, the engine shall be disposed of in
appropriate locations, in conformity with the law in force.
• Before scrapping, it is necessary to separate the rubber or
plastic parts from the rest of the components.
• The parts only composed of plastic material, aluminium
and steel can be recycled if collected by the appropriate
centers.
• Waste oil must properly be recycled and disposed of in the
correct way to safeguard the environment. According to the
laws in force, it is classified as hazardous waste, therefore it
must be collected by the appropriate centers.
6.7 Air cleaner replacement
1. Loosen clamp A and remove
filter B from support C.
2.
Fasten the new air cleaner B
onto support C using clamp A.
6.6 Coolant replacement
1. Undo cap A to drain all liquid from the system contained in
the engine crankcase ducts into an appropriate container
(Par. 3.5).
Important
• Perform the operations described in Par. 5.6 before
proceeding.
• Replace gasket C.
2. Screw cap A onto crankcase B, inserting gasket C
(tightening torque 50 Nm).
3. Perform the operations described in Par. 4.7.
ED0053032450