4
USER INSTRUCTIONS
It is important that you use the right size of Lola&Lykke support belt and
that it is positioned correctly, to achieve the best level of support. The
graphics and product images on the packaging indicate the correct
sizing and the correct positioning of the belt. When doing this, follow
these steps:
1. Open the support belt by undoing the hook and loop fastener.
2. Place the belt with the large surface level on the lower back so that
the product label is on the bottom right side as you place the belt
around your hips and waist.
3. Fasten the lower level hook and loop panel around the hips, so that
it feels comfortable.
4. Then fasten the upper level hook and look panel around the waist,
ensuring that there are no folds in the fabric that could cause a
pressure sensation.
5. The band should be worn at a comfortable tightness and allow
you to breathe freely all the way to your stomach. If it restricts your
breathing, loosen the compression of the band.
6. Be cautious of tightening the band too much, as this may place
excessive pressure on your pelvic floor. The postnatal band should
be tightened just enough to offer gentle support, but no tighter.
7. If you feel that the support belt is too tight or too loose, repeat
steps 1 - 4 and change the tension of the elastic straps. There is an
application video on our website to show you how to position the
belt correctly.
Summary of Contents for TJ-CJ-CORL
Page 2: ...EASE BACK PAIN DAILY SUPPORT REGAIN SHAPE STABLIZE WOUND ...
Page 68: ......
