USER INSTRUCTIONS
It is important that you use the right size of Lola&Lykke support belt
and that it is positioned correctly, to achieve the best level of support.
The graphics and product images on the packaging indicate the cor-
rect sizing and the correct positioning of the belt. When doing this, fol-
low these steps:
1. Open the support belt by undoing the hook and loop fastener.
2. Place the belt with the large surface level on the lower back so that
the product label is on the bottom right side as you place the belt
around your hips and waist.
3. Fasten the lower level hook and loop panel around the hips, so that
it feels comfortable.
4. Then fasten the upper level hook and look panel around the waist,
ensuring that there are no folds in the fabric that could cause a
pressure sensation.
5. The band should be worn at a comfortable tightness and allow
you to breathe freely all the way to your stomach. If it restricts your
breathing, loosen the compression of the band.
6. Be cautious of tightening the band too much, as this may place ex-
cessive pressure on your pelvic floor. The postnatal band should be
tightened just enough to offer gentle support, but no tighter.
7. If you feel that the support belt is too tight or too loose, repeat steps
1 - 4 and change the tension of the elastic straps. There is an appli-
cation video on our website to show you how to position the belt
correctly.
