23
4. How to use the air inflator function?
4.1 The inflatable hose is connected to the output port of the air inflator, and then tighten the nut, and the other end is
connected to the car tire;
4.2 To wake the product (short press the "Light" button or short press the "Switch" button) to enter the air inflator mode;
4.3 Short press the "BAR/PSI" button to switch the pressure unit of tire pressure: BAR, PSI;
4.4 To set the target tire pressure value, you must first know the tire pressure requirements of the tire. (For
the standard tire pressure value of the tire, you can check the pressure value mark on the tire, or check the
manual of the inflated product), set the target tire pressure value by pressing "+ -" . After setting, the value
will flash for 3 seconds, exit the setting state and enter the real-time monitoring state of tire pressure;
(Safety reminder: If the target tire pressure value of the tire is not set, directly turn on the air pump. At this time,
the air pump will not automatically charge and stop. It needs to be turned off manually. If the tire pressure is not
monitored in real time, there will be The risk of excessive tire pressure or puncture)
4.5 Long Press the "PUMP" button for 3 seconds to turn on the air inflator. When the tire pressure reaches the
set value, the air inflator will be turned off automatically. To turn off the inflator manually: press the "PUMP"
button or the "Switch" button;
4.6 Remove the inflatable hose
(Safety reminder: During the inflation process, the heat generated by the air inflator will cause local high
temperature. Please leave the product for 10 minutes to dissipate heat before removing the inflation tube to
prevent scalds)
Pressure
conversion
table
Unit
bar
kPa
PSI kgf/cm2
Value
1
100
14.5 1.02
