Knob
Description
Solenoid valve for shielding gas opens
Weld start voltage is applied on wire electrode
Wire feed starts with reduced speed and arc ignites
Wire feed switches to the start level wire feeding
speed
Weld current flows
2
nd
cycles
: Release torch button
Change from start parameter to set parameter via a
time function (Up-Slope)
Continue welding
3
rd
cycles
: Press torch button again
Change from set parameter to stop parameter via a
time function (Down-Slope)
Continue welding
4
th
cycles
: Release torch button again
Wire feed stops
Weld voltage is switched off after expiration of the
burn back time
Arc extinguishes
Solenoid valve open after expiration of the gas
post-flow time
Spot welding: The spot function allows spot welding for
a defined time
After pressing the torch button, the controller
automatically stops the welding process after expiration
of the defined time. The range of time is 0.5~10.0s. The
welding process is immediately stopped if the torch
21
