LOKERMANN GRAND AIR HD, User Manual

Page: 4 / 22

Battery Type Rechargeable Li-ION 4400mAh
Expected Battery
Operation Time
Level 1>8h
Level 2>6h
Level 3>4h
Battery Charging Time 3.5 Hours
Battery Life 500 Charges
Run Time Dependent On Air Flow Rate and Filter Load.
LCD Display Air flow level and data
Battery capacity
Filter status
Belt Size 35-2/5 x 51-2/5 in. (900mm to 1300mm)
OPERATION INSTRUCTION
BEFORE USE
-Check for light tightness and check the inside & outside protection lens are clean and that no
dirt is covering the sensors on the front of the
auto-darkening-filter (ADF) cartridge.
-Make sure the protection films on both inside & outside protection lens are removed.
-Inspect all operating parts for signs of wear or damage. Any scratched, cracked, or pitted
parts should be replaced immediately.
This ADF is fully controlled by a Remote control and connected with Bluetooth. All the
adjustment of the ADF is operated on Remote Control. ADF will change to the Function
mode you set by the Remote Control.
LED FLASH EXPLANATION ON ADF
There are 3 LED on the ADF showing the working status of the ADF.
1. RUNNING(Green):
a. LED will flash once every 2 Sec while pairing with Remote Control
b. After succeed paired, LED will flash when ADF receives control signal from Remote
Control
2. GRINDING/CUT(Orange):
a. LED will flash when ADF work in Grind/Cutting mode
3. LOWPOWER/CHARGING(Red/Green):
a. LED will become red when ADF out of power
b. LED will be green and will flashing while charging
c. LED will be green and normally on when charging finished