Operating instructions
4040, 4050 and 4140 examination tables/Version 1.15
Copyright © Lojer Oy, 2007
24
11.1
International warranty conditions
1. The warranty is only valid if, when warranty service is required, the warranty demand is
presented with the original invoice or sales slip or (order) confirmation, and the serial
number on the product has not been defaced.
2. Lojer’s obligations are limited to the repair or, at its discretion, replacement of the
product or the defective part. For this, the customer is responsible for the despatch and
insurance of the product. The transport and insurance costs shall be borne by the
customer. Lojer shall assume the costs for the materials / spare parts and the labour
costs as required, as well as the return postage to the sender.
3. In case of warranty repairs, they must be carried out by Authorised Lojer Dealers. No
re-imbursement will be made for repairs carried out by non Lojer representative and,
any such repair work and damage to the products caused by such repair work will not
be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by
reason that it requires adaptation in order to conform to national or local technical or
safety standards in force in any Country other than the one for which the product was
originally designed and manufactured.
5. This warranty covers none of the following:
a) Periodic check-ups, maintenance and repair or replacement of parts due to normal
wear and tear (such as upholsteries, ropes or reduced capacity of accumulators)
b) Cost relating to transport, removal or installation of the product.
c) Misuse, including the failure to use this product for its normal purposes or incorrect
installation.
d) Damage caused by Lightning, Water, Fire, Acts of God, Natural Catastrophes, War,
Public Disturbances, incorrect mains voltage or any other cause beyond the control of
Lojer.
e) Spillage of chemicals or liquid or use of any other hazardous or non-instructed
substances, which may affect the product.
f) Minor defects or deviations from the product specifications, that are immaterial or
negligible or trivial as regards to the value or the functioning of the product
11.2
Proceeding in a warranty case
The following information is an explanation of what you must do in the case of a
warranty claim. At first, please contact your Lojer dealer. There our employees will help
to diagnose defects and malfunctions. They are often capable of eliminating the
malfunction over the phone.
Please always have the following information
ready before calling the dealer:
