LogTag
®
-
20 Day Pharmaceutical Temperature Indicator with display
© Copyright 2013, LogTag Recorders Limited
page 16 of 17
TIC20 Factory Pre-sets
LogTag
®
TIC20 indicators cannot be client configured, but instead are purchased with one of a
number of different factory configuration profiles pre-installed. If a default configuration does not suit,
customers can compile their own profile by specifying the parameters in the table below when
ordering. Please note that minimum order quantities apply for TIC20 units with profiles not stocked by
LogTag
®
.
The default configuration profile is called “Profile 0006”; each custom configuration is assigned a
different profile number which can be used for ordering.
Description
Profile 0006
(default)
Range / Option
Requirement
Maximum Days
(Maximum number of days to monitor)
20
1-20
Sampling interval
6 minutes*
1 to 15 minutes
Start Delay
60 minutes
0 to 99 minutes, 0=no delay
Display Temperature units
°C
°C or °F **
Hibernate once STOPPED
(Stops the Real Time Clock, increases length of period in
which the unit can be downloaded)
off
on or off
Allow stopping with STOP button
on
on or off
ALM 1
(Alarm
Limit 1)
Monitor this alarm
enabled
enabled or disabled
Temperature limit value
10°C
-30°C to 60°C (-22°F to 140°F)
Alarm activation
instant
instant, accumulated or consecutive***
Activation delay time****
N/A
1 minute to 45 days
Direction
upper
upper/lower
ALM 2
(Alarm
Limit 2)
Monitor this alarm
enabled
enabled or disabled
Temperature limit value
8°C
-30°C to 60°C (-22°F to 140°F)
Alarm activation
accumulated
instant, accumulated or consecutive***
Activation delay time****
12 hours
1 minute to 45 days
Direction
upper
upper/lower
ALM 3
(Alarm
Limit 3)
Monitor this alarm
enabled
enabled or disabled
Temperature limit value
2°C
-30°C to 60°C (-22°F to 140°F)
Alarm activation
accumulated
instant, accumulated or consecutive***
Activation delay time****
12 hours
1 minute to 45 days
Direction
lower
upper/lower
ALM 4
(Alarm
Limit 4)
Monitor this alarm
enabled
enabled or disabled
Temperature limit value
0°C
-30°C to 60°C (-22°F to 140°F)
Alarm activation
instant
instant, accumulated or consecutive***
Activation delay time****
N/A
1 minute to 45 days
Direction
lower
upper/lower
*
6 minutes = 0.1 hour; preferred intervals are 1, 2, 3, 6 and 12 minutes
**
When °F is chosen, temperatures above 99°F will be shown on the display without a decimal point, but will be listed correctly in downloaded
data.
*** Instant = one temperature reading is above/below limit; consecutive = temperature readings are above/below limit for the time defined in the
activation delay time without interruption (single event); accumulative = temperature readings above/below limit for a total of time defined in
the Activation delay time, but may not necessarily be sequential.
**** Delay times for alarm activations must be in multiples of the sampling interval.
