Preparing a UTRED30-16 for first use
UTRED30-16 User Guide
15
Standard Configuration Settings
The standard configuration is similar to those of other LogTag
®
logger products and
includes settings such as
User ID
,
start method
,
pre-start recording
,
logging interval
and
duration
,
start delay
, and
password
.
Adjust the settings as required. For detailed information about each parameter please read
the section about
Configuring a LogTag
®
for logging
in LogTag
®
Analyzer’s User Guide
or press F1 for help.
UTRED30-16 Start Options
During configuration with LogTag
®
Analyzer you can decide when the UTRED30-16 starts
taking temperature readings:
Push button start
The logger will start taking temperature readings as soon as you have pressed the
START
/CLEAR/STOP
button (see
Starting the Logger on page 29
).
When you choose the push button start option, you can
Enable pre-start logging
(or
disable it) and also
Begin recording after a delay
.
Pre-start readings
If you enable pre-start readings, the UTRED30-16 starts recording as soon as it is
unplugged from the USB port
2
and will continue to do so until you start the unit via the
button. No alarms are processed while pre-start readings are being taken, pre-start
readings will not appear in the PDF file after the logger was started, and no PDF file will be
generated if only pre-start readings are present in the logger. Using pre-start readings is a
2
The first pre-start reading is taken one log interval after you unplug the unit from the USB port.