Display Overview
TREL30-16 User Guide
17
l
If
READY
is shown, the TREL30-16 is ready to be started with the
START
/CLEAR/STOP
button.
Depending on the configuration it may already record pre-start readings.
l
If
STARTING
is shown, the logger has been started, and a start delay is active. The word
DELAY
is also shown, together with the time in hours and minutes until the start.
l
If
is shown, the TREL30-16 is recording temperature at the sample interval defined
during configuration.
l
If
is shown together with the word
PAUSED
, the product is also recording, but the
recorded values are not taken into account when calculating alarm events and durations.
l
If the word
STOPPED
is shown, the TREL30-16 has finished recording temperature data.
Time Value and Time Indicators
The time value display is used to show one of the following:
l
The current time
l
The time remaining until the logger starts recording (for a delayed start)
l
A duration, for example of an alarm
The time indicators identify which of those is displayed as follows:
l
If
TIME
is shown, the time value represents the current time in hours and minutes (24- hour
format).
l
If
DELAY
is shown, the time value represents a start delay, or the time remaining until a
date/time start will occur.
l
If
DURATION
is shown, the time value represents the duration, for example the time above
the upper alarm limit.
The word
boot
appears in place of the clock if new firmware is being uploaded to the TREL30-16.
The word
USb
appears when the unit is plugged into a USB port.
The word
dtst
appears in place of a time value if the logger is configured for a date/time start, and
the start time has not yet passed.
Reading Type
The word
CURRENT
is shown when the temperature on the display represents the last recorded
temperature.
The word
MAX
is shown in Review mode, when the temperature on the display represents the
maximum recorded temperature for the day displayed.
The word
MIN
is shown in Review mode, when the temperature on the display represents the
minimum recorded temperature for the day displayed.
Above/Below Threshold Arrows
The up-arrow is shown when the temperature displayed (i.e. last recorded) is above the
specified upper temperature threshold. The down-arrow is shown when the temperature
displayed is below the specified lower temperature threshold.
Temperature Units
Depending on the selected PDF temperature units, this shows either °F or °C.