Quick Installation Guide
Installation
LigoWave
Page 10
Step 4.
Attach the following part of the mounting bracket to the unit with 4 screws as displayed
below
:
Step 5.
Attach the second part of the mounting bracket to the wall using screws (not included)
as displayed below:
Step 6.
Connect the mounting bracket together as displayed below and tighten up:
It is recommended not to tighten the units to its mounting brackets until the alignment
process of the antenna is complete.
Step 7.
Power-up the LigoPTP 5-23 UNITY unit.
It is recommended to use shielded Ethernet cable to reduce exposure of the
electromagnetic noise.
Step 8.
Run the
Antenna Alignment
tool on Web management interface or on OLED screen
(
Figure 2
– Antenna Alignment Tool on Web
and OLED) and move the antenna in the
horizontal and vertical planes until the maximum RSSI visible on the Antenna
Alignment graph is achieved.
Avoid standing directly in front of an operating antenna while aligning.
Step 9.
After the maximal RSSI is reached, tighten the unit
’s bracket in the optimum position.
