background image

LOGOSOL continuously develops its products.  

For this reason, we must reserve the right to modify  

the configuration and design of our products.

Document: LOGOSOL WDU Wood Drying Unit User Manual

Ref. No. User Manual, English: 0458-395-0631

Text: Mattias Byström 

Illustrations: Martin Melin

Last revised: December 2019

© 2019 LOGOSOL, Härnösand Sweden

THANK YOU FOR CHOOSING A LOGOSOL MACHINE!

Read through the user manual carefully 
and make sure you understand its 
contents before you use the equipment.
This user manual contains important 
safety instructions.

WARNING!

 Incorrect use can result in 

serious or fatal injuries to the operator 
or others.

W

elcome! We are very pleased that you have demonstrated your confidence in us by 
purchasing this wood drying kiln, and we will do our utmost to meet your expectations.

Logosol has been manufacturing sawmills since 1989. In that time we have supplied 
approximately 50,000 machines to satisfied customers the world over.

We care about your safety as well as we want you to achieve the best possible results with your 
wood drying kiln. We therefore recommend that you take the time to carefully read this user 
manual from cover to cover in peace and quiet before you begin using the equipment. Remember 
that the machine itself is just part of the value of the product. Much of the value is also to be 
found in the expertise we pass on to you in the user manuals. It would be a pity if that were not 
utilised.

We hope you get a lot of satisfaction from the use of your new equipment.

Bengt-Olov Byström
Founder and Chairman,
Logosol in Härnösand, Sweden

#1

Summary of Contents for WDU













Reviews: