10
2 x
M6x35
4 x
M10
M8
M8
M10
M10
4 x
M8
6 x
M8x95
8310-001-0110
1 x
01-00570
2 x
03-03011
Install the new tip protection strips with the bolts/
screws that hold the rails. Note that assembly
begins and ends with the ‘end pieces’
Be careful not to unscrew the bolts/screws too
much, as this could cause the nuts to fall out.
Install the wheels of the sawhead on the tip
protection plate. Use the washers and nuts
from the existing assembly.
Use the existing screws on the sawmill.
Start the assembly by installing the new
anti-tip protectors.
Install the sawhead lock on the bogie tube.
Replace existing nuts with item 03-03011.
Then repeat the assembly on the second
bogie tube.
