11
4.2 Avoid overloads
The maximum load must not be exceeded.
Remember
, the Logitilt is designed for
evenly distributed load, - goods on pallets etc. If the forks are point-loaded on one
side there is a risk of bending.
4.3 Avoid offset loads
The load must be placed evenly and squarely. The maximum distance from
fork bracket front to centre of gravity must not be exceeded. If this distance
is exceeded, safety is reduced and there is a risk of toppling. Goods in crates,
boxes, etc. must be secured so that they cannot fall off during running, or when
Logitilt is in its tilted position.
4.1 Safety regulations
• Never walk under a tilted load!
• Do not exceed the permitted capacity of the product.
• Before lowering the forks, make certain that no foreign
elements can hinder the free lowering of the forks.
•
The Logitilt is designed for use on even and level floor.
• During transport the forks shall be raised as little as possible.
• Transport with tilted forks should be made over the shortest
possible distances and at low speed.
4.0 Optimum safety
Summary of Contents for LOGITILT LT1001
Page 1: ...LOGITILT LT LTS...
Page 10: ...10 Operation position ATTENTION Moving parts 4 0 Optimum safety...
Page 18: ...18...
Page 19: ...19...