PAIRING HEADSET, KEYBOARD AND MICE VIA USB RECEIVER
1 Download Logitech
®
Unifying Software at www logitech com/support/unifying
2 Insert the Zone Wireless Plus receiver into the computer USB-A port
Zone Wireless Plus
headset
is already paired to the receiver it ships with Just turn the headset on Headset is
successfully connected when light indicator on receiver turns solid white
3 To pair
mice
and
keyboard
,
a Open the software and continue clicking “Next” on the bottom right corner
If you already have other unifying receivers (with logo), please unplug them
b Locate the OFF-ON slider on your mice and keyboard Turn each device off and back
on to restart your devices and finish pairing
- If paired, please follow the on-screen prompt and test it out to confirm successful
pairing
- If pairing failed, please retry or refer to our support page www logitech com/support/
zonewirelesspluspairing
NOTE: you can pair up to 6 Logitech Unifying peripherals
ADJUSTING HEADSET
1 Adjust headset by sliding earcups up and down
the headband
2 It may be easier to adjust the headset on your head
Move the earcups up and down the headband until
they sit comfortably on your ears
ADJUSTING THE MICROPHONE BOOM
1 Microphone boom rotates 270 degrees Wear it on either
left or right side Audio channel will switch automatically,
depending on the direction you are wearing
the microphone
2 Flexible microphone boom — adjust boom location
to capture voice better
OFF/ON
www.logitech.com/
support/unifying
Advanced
Next
5 English
