background image

User Manual 

 

Harmony 890 Pro 

Adding Additional Harmony 890 Pro remotes to a Harmony 890 Pro 
Account 

You can add up to 6 Harmony 890 Pro remotes to a Harmony 890 Pro account. Only Harmony 890 Pro 
remotes can be added to a Harmony 890 Pro account. You cannot add other remotes to Harmony 890 
Pro accounts. In addition, Harmony 890 Pro remotes cannot be added to other accounts. 

To add additional Harmony 890 Pro remotes: 

1.  Log in to your account. 

2. Click 

My Remote

.  

3. Click 

Add

.  

4.  Select the 890 Pro remote. 

5. Click 

Next

6.  Ensure your 890 Pro remote is connected to your computer via the USB cable. 

7. Click 

Next

Once the remote is added to the account, devices can then be mapped to it. 

Using Multiple Remotes and RF Wireless Extenders 

When setting up a multi-remote, multi-extender account, it is important to remember which remote 
performs the Z-Wave network setup (the remote that you pair the lights and extender to). This remote is 
referred to as the 

Primary remote

. It is strongly recommended that you put a means of identifying the 

primary remote (e.g. a sticker) on the remote for easy identification later. 

Even though each remote is connected and a configuration file is downloaded after account setup, some 
Z-Wave information is not transmitted to the other remotes. 

Once you have completed the setup you must send the information from the primary remote to the other 
remote(s) (these other remotes are referred to as secondary remotes). This is an important step in 
ensuring that everything works properly. The instructions for this step can be found on the web page 
immediately after the configuration is downloaded. 

Once the remotes and RF extenders have been updated, you need to set the 

Primary remote

 and the 

Secondary remote

Note:

 Do not have more than one remote operating at the same time in the same room. 

Setting the Primary Remote: 

1.  Once you have updated your remotes, the display on the remotes will show a welcome greeting; 

press 

OK

.  

2. Continue 

pressing 

OK

 until you see the start of the 

Activities

 menu. 

3. Press 

System Options

4. Press 

RF Network Tools

.  

5. Press 

-->

 to view more options.  

6. Press 

Add a Secondary Controller

 (only the Primary remote has this option) to add the remote. 

Note: 

If you do not see this option, it means you are not setting the correct remote. Go to step 4 

in 

Setting the Secondary Remote

.  

7.  Once the remote has been added, a message will appear. Press 

OK

 to return to the start of the 

Activities

 menu. 

v. 1.0 

 

page 8 

Summary of Contents for 966196-0403 - Harmony 890 Pro Advanced Universal Remote Control






















Reviews: