4
Installation Steps
Hardware Installation
Due to the way this Gas Detector works, it is recommended that you install the device on a wall
(
wall-mounted
method). In this vertical orientation it is more efficient at detecting the movement of
the airflow/gases. The
Smart Gas Detector
requires a mains supply to operate, so please make sure
that the cables are in place at the location you wish to mount the device.
Some things to bear in mind, prior to installation:
•
The
Smart Gas Detector
must be installed in a room where there’s a possibility of a gas leak
to be most effective.
•
Do not install too close to the stove, due to any steam from cooking.
•
Do not install near an extractor fan, as this will affect detection efficiency.
•
Do not install anywhere damp, like the bathroom.
•
Vibrations can cause issues, so keep away from fridges and washing machines.
Install Option 1
1)
Turn of the main supply before you begin!
2)
Mark out the two screw locations using the supplied template, then drill the holes with a
5mm drill bit.
Screw Locations
