14
Adding the Device to the Smart Home Network
Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the
Logika Smart Mobile App
user guide which will take you through the process of adding smart
devices to the system.
Refer to the information below to locate the device in the
Device Add
screen. Once selected, the app
will walk you through how to add the device to the system.
Device Category:
Smart Lock
Device Name:
Bern Serial IoT Doorlock
Note:
The default admin passcode is
123456
. Enter this on the keypad when requested, followed by
the
#
key.
If this code does not work, you may need to perform a factory reset. This can be done by pressing
the
Factory Reset
button, the hole for which is located below the battery compartment. You will
need a small pin or paperclip to reach the button and keep it pressed it for 10 seconds.
