12
Operation
Switching On Your Unit
1. Connect the mains cable to the mains socket.
The internal temperature of your unit is
controlled by a thermostat. There are eight
settings, of which position 7 is the coldest and
position 0 turns the unit off.
2. Adjust the thermostat control dial to the desired
position, bear in mind that the higher the
number, the lower the temperature. Position 4
is the recommended setting when operating at
normal room temperature (between 16°C and
38°C).
3. The unit may not operate at the correct
temperature if it is in a particularly hot or a
particularly cold room, or if you open the doors
often.
4. To ensure that the unit is cool enough to
sufficiently chill your food, wait 24 hours before
filling it with food.
5. If you are concerned that your unit is not
being kept cold enough and wish to check the
temperature, you will need a special fridge
thermometer. These are available from most
supermarkets and hardware shops.
Place the thermometer in either the fridge
compartment and leave overnight. The correct
temperature for the fridge compartment should
be an average of 5°C.
Adjusting the Temperature
The internal temperature of the unit is controlled by a thermostat. The recommended position
is between 1 to 4 for colder working environments (i.e. during winter) and between 5 to 7 for
hotter environments. Please adjust according to the environment.
Noises Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has
become more pronounced since the introduction of CFC free gases. This is not a fault and will
not affect the performance of your unit. This is the compressor motor working, as it pumps the
refrigerant around the system.
LTL60W14_IB_RC_140509_grace.indd 12
9/5/14 5:16 pm
