
22
INSTALLATION
GB
Location
When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well
ventilated with an average room temperature of between 10°C and 38°C. Avoid locating your unit near a heat
source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption.
Extreme cold ambient temperatures may also cause the unit not to perform properly. This unit is not designed
for use in a garage or outdoor installation. Do not drape the unit with any covering.
Levelling the Unit
To do this adjust the two levelling feet at the front
of the unit. If the unit is not level, the doors and
magnetic seal alignments will not be covered
properly.
Make sure the levelling feet (not the rollers) are well
secured to the floor to prevent movement of the
appliance.
Y mm
Y mm
X mm
X mm
Free Space Requirements
When installing the unit, ensure that 25 mm of free
space is left at both sides, 50 mm at the rear of the
unit and 25 mm at the top of the unit.
Please ensure there is more than twice the width and
depth distance space of the unit to fully open the
door.
Moving the Unit
Adjust the levelling feet until the rollers can roll
freely.
LSBSX_W16E_IB_5L_RC_190411_grace.indb 22
11/4/2019 11:22 AM