
24
GB
INSTALLATION
17. Attach the toe panel mounting brackets to
the toe panel. Align the screw holes, then
secure the toe panel.
18. Insert the toe panel to the dishwasher.
Water mains
Y-Adaptor
(not included)
Connect
to another
appliance if
required.
Water supply hose
19. Make sure your plumbing is suitable for use
with the dishwasher. If in doubt contact
a qualified plumber. This unit MUST BE
connected to COLD WATER MAINS using the
new water inlet hose. OLD HOSE SETS MUST
NOT BE RE-USED. The water pressure from
the water mains needs to be at a minimum
of 0.04 MPa and a maximum of 1.00MPa.
t
Connect one end of the safety water
supply hose to your dishwasher, and
then connect the other end of the hose
to your water mains. Please ensure the
black rubber seal is in place.
t
After connecting the hose, turn on your
water mains and check for leaks.
t
Connect the dishwasher to the mains
socket.
Supplied toe panel
M4x10 screw
M4 nut
Created toe panel
ST4x14 screw
LID60W16N_IB_5L_RC_160817_grace.indb 24
17/8/16 12:00 pm