7
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT
REPAIRS YOURSELF.
• Do not sit or stand on the door or dish rack.
• Do not move your dishwasher by holding the door or its edges. Hold the
dishwasher around its sides or base when moving it.
• Do not touch the heating element during or immediately after use.
• Do not operate your dishwasher unless all enclosure panels are properly
in place. Open the door very carefully when there is a programme
running, as there is a risk of hot water spraying out of the appliance.
• Do not place any heavy objects on the open door. The appliance could
tip.
• When loading items to be washed:
• Locate sharp items so that they will not damage the door seal;
• Warning: Knives and other utensils with sharp points must be loaded in
the basket with the points downwards or placed horizontally.
• Do not allow plastic items to come into contact with heating element.
• Check that the detergent receptacle is empty after completion of the
wash cycle.
• Do not wash plastic items unless they are marked dishwasher safe or
equivalent.
• Use only detergent and rinse aids designed for an automatic dishwasher.
• Other means for disconnection from the supply must be incorporated in
the fixed wiring with at least 3mm contact separation in all poles.
• The door should not be left in the open position since this could present
a tripping hazard.
• For energy saving, always remember to switch the dishwasher off when
you have finished using it. The dishwasher should not be left unattended
when in use.
• Remove the door to the washing compartment when removing an old
dishwasher from service or discarding it.
• During installation, the power supply cord must not be excessively or
dangerously bent or flattened.
• Do not tamper with controls.
• The appliance is to be connected to the water mains using new hose
sets.
• The maximum number of place settings to be washed is 9.
• The maximum permissible inlet water pressure is 1Mpa, and the
minimum permissible inlet water pressure is 0.04Mpa.
LID45W13N_IB_131028_Zell.indb 7
28/10/13 11:01 AM
Summary of Contents for LID45W13N
Page 2: ......