INSTALLATION
7
3. Remove the three screws, then remove the
upper hinge that holds the door in place. Lift the
upper door and place it on a padded surface to
prevent it from scratching.
4. On the top panel move the blanking plate to the
side opposite of the hinge.
5. Take off the middle hinge by removing the
screws. Lift the lower door and place it on a
padded surface to prevent it from scratching.
Remove the screws’ covers and place them on
the opposite side.
6. Remove the lower screws, hinge bracket and
adjustable foot from the unit bottom. Keep the
matching bracket and foot together.
7. Remove the remaining screw-type adjustable
foot from the other side of the unit bottom,
then reverse the position of the hinge. Transfer
it to the corresponding position on the opposite
side of the unit bottom.
180˚
unscrew
screw
LFC60W13_IB_130124_Shaun.indd 7
24/01/2013 11:40 PM
