40
GB
Hints and Tips
Technical Problems
Technical Problems
Problem
Possible Causes
Remedy
The dishwasher does not start. The door is not properly
closed.
Close the door firmly.
The unit is not connected to
the mains socket.
Connect the mains plug to the mains
socket.
The unit is not switched on.
Press the Power button and select a
programme.
Error code “E1” displayed.
Water tap is not turned on.
Turn on the water tap.
Low water pressure (<0.04MPa) Turn on the water tap and ensure it is
in full position.
Flow meter is broken.
•
Disconnect from the mains.
•
Disconnect the water inlet.
•
Call a qualified technician.
The wire terminals which
connect the flow meter are
loose.
Error code “E4” displayed.
The tank is leaking.
The hose is leaking.
The float switch is broken or
PCB is faulty.
Normal Programme LED blinks. Unit is overfilling with water.
Shut off the water tap, disconnect
from the mains and contact a
qualified service agent.
The drain pump is not working
properly.
The anti-flooding system has
operated.
•
Disconnect from the mains socket.
•
Disconnect the water inlet.
•
Call a qualified technician.
General Problems
Problem
Possible Causes
Remedy
Detergent residue is left in the
dispenser at the end of the
programme.
The detergent dispenser was
still damp when detergent was
added.
Make sure the dispenser is dry before
adding detergent.
The detergent dispenser lid
cannot be closed properly.
Clogged detergent residue is
blocking the catch.
Clean the catch.
Repairs should only be carried out by a qualified technician in strict accordance with current
local and national safety regulations. Unauthorised or incorrect repairs could cause personal
injury or damage to the unit.
Before calling for service, please refer to the section Hints and Tips to solve some general
problems by yourself.
LDW45W15N_IB_5L_Final150223.indb 40
23/2/15 4:55 pm
