11
Setting the Alarm
There are two separate alarms you can set on this clock radio AL1 (Alarm 1) or AL2 (Alarm 2).
Each alarm can be set to wake you up with a buzzer or the radio. The radio must be tuned
to a radio station to work, otherwise it will default to the buzzer. The radio will switch on at
the last volume setting you used.
1. Make sure the unit is in OFF mode.
2. Press the AL1 button to set Alarm 1 or AL2 to set Alarm 2 the display will start to flash.
3. Press the HOUR + or MINS - button to set the time that you want the alarm to switch
on. Press AL1 or AL2 to complete setting the alarm time.
4. Press either AL1 or AL2 depending on which alarm you are setting to toggle between
BUZZER, RADIO and ALARM OFF. If you choose RADIO, ensure that the radio is tuned in.
5. An LED will light up on the display to show which alarm has been set and what type of
alarm has been selected (AL1 or AL2).
Turning the Alarm On/Off
If the LED next to BUZZER or RADIO is lit the corresponding alarm has been set and when
it’s not lit the alarm is OFF. Press the AL2 or AL1 button to select the alarm, then keep
pressing the button to scroll through the alarm settings:
Alarm OFF = LED off
Alarm ON = BUZZER LED or RADIO LED on.
Switching the Alarm Off Once it Sounds
The alarm will sound (either buzzer or radio) for 60 minutes then automatically switch off,
if no buttons are pressed.
To switch the alarm off when it sounds press the ALM OFF/FUNC button.
Snooze Function
Press the SNOOZE button when the alarm sounds. The alarm will go off and will then
sound again in approximately 9 minutes. You can keep snoozing the alarm until the alarm is
switched off.
The LED next to the alarm setting will flash while in Snooze mode.
Logik Clock Radio LCRB15 Manual.indd 11
30/10/2019 11:39
