Logik LAVSEN10, Instruction Manual

Page: 8 / 20

GB-8
Setting Up your AV Sender
Connecting The Receiver
(connect to 2
nd
TV (e�g� bedroom or kitchen)
1� Plug the supplies 3�5mm to RCA cable into the A/V OUT socket
on the receiver and then plug into the RCA socket on your TV
located in the receiving room�
*Optional: Alternatively you may use the supplied
SCART IN RCA adapter (Receiver)�
2� Connect one of the supplied power adapters to the power
adapter socket on the receiver and then plug the power adapter
into the mains socket�
IR Remote Extender
3� Open the battery compartment cover� Insert 2 AAA batteries
and then replace the cover�
4� Position the remote extender on top / in front of your TV or
any other location in the direct line of sight with your remote
controls� Use an adhesive pad to hold it in place when you are
happy with the position�
Please insert the batteries with the correct polarities�
Logik_LAVSEN10_101130.indd 8 11/30/10 11:14 AM