19
Basic Playback
Ensure that the screen protection film is removed before use.
Some DVDs are produced in a manner that allows for specific or limited
operation during playback. Therefore, this unit may not respond to all operating
commands. This is not a defect.
This instruction manual explains the basic instructions for operating this unit. Some DVDs
are produced in a manner that allows for specific or limited operation during playback.
Therefore, this unit may not respond to all operating commands. This is not a defect.
Please refer to the instructions accompanying the specific DVD in question for more
information about the options available on that DVD.
“ ” may appear on the screen during operation. “ ” means that the desired operation is not
permitted by the unit or disc.
Turning On the DVD Player
1. Slide the ON/OFF switch to ON position on the side
panel to turn the DVD player on.
2. The LOGIK DVD logo (start-up picture) will appear
on the screen and the unit will start loading the disc
automatically (if available).
3. After use, slide the ON/OFF switch to OFF position on
the side panel to turn the DVD player off.
Region Code
Both the DVD player and the discs are coded by
region. These regional codes must match in order
to play the disc. If the codes do not match, the disc
will not play.
The Region Number for this DVD player is
described at the bottom of the DVD player.
Disc Type
DVD-VIDEO
Region code
L7SPDVD16_IB_Final171221V6.indd 19
21/12/2017 3:13 PM
