Logik L72PDT11E, Installation Instructions Manual, Page: 17 / 172

17
GB
DVD Player
Right side
To the mains socket
Mains Adapter
(Included)
To DC IN 12V
Socket
Power Source
Mains Power
• This unit operates with a DC 12V 0.83A mains adapter (included).
• Connecting the unit to any other power source may cause damage to the unit. Unwind the mains
adapter to its full length. Connect the mains adapter to the AC socket on the rear of the unit and a
mains socket. Make sure the mains adapter is fully inserted into the mains socket. The unit is now
connected and ready to use.
• To switch the unit off completely, withdraw the mains adapter from the mains socket.
Turning on the Power
After the power adapter is connected to wall outlet, the LED
indicator will be illuminated in red. Slide the ON/OFF switch to
ON position on the right panel, and the LED indicator will be
illuminated in green. The start-up picture will appear on the
screen.
• Turn off the unit before unplugging the mains adapter from the unit to avoid the unit being damaged.
• When the unit is not going to be used for a long period of time, disconnect the mains adapter from
the mains socket.
• The mains socket must be located near the unit and should be easily accessible. If a malfunction
occurs, disconnect the plug from the mains socket at once.
• When the mains adapter is plugged in, the unit is not completely disconnected from the main power
source, even when the unit is turned off.
After use, slide the ON/OFF switch on the DVD Player to
the OFF position.
L72PDT11E_IB_final110307.indb 17 07/03/2011 6:06 PM