GB-17
Pr
epar
ation
Connec
tions
Initial
Setup
U
sing
the
Fea
tur
es
H
in
ts
and
Tips
, Specifica
tion
and
Saf
et
y
W
ar
nings
U
sing
the
Fea
tur
es
via
USB
por
t
6..
Press the
buttons to select your desired language to be displayed on the
menu and then press the
OK
button to confirm.
8..
Select “
Scan
” on the screen and then press the
OK
button on the
remote control to start the First Channel Scan.
You can select the desired broadcasting signal region after scanning channels.
Select “
Skip.Scan
” on the screen can cancel the Scan.
An initial Setup reminder will appear the next time you turn on
the TV.
Turning.the.TV.On.for.the.First.Time
1..
Connect the mains cable to the mains socket after you have
completed all the connections.
2..
Switch on the
POWER.ON/OFF
at the rear of the TV. At this stage,
the TV switches to standby mode. The red LED indicator will
illuminate on the front panel of the TV.
3..
In standby mode, press the
. ./.
button on the right side of the TV
or the
. .
button on the remote control to turn the TV on. The red
LED indicator will turn blue.
Always disconnect the TV from the mains socket when not in
use for a long period of time.
The
. ./.
button on the right side of the TV or the
. .
button
on the remote control is only used for switching the TV into
standby, it does not disconnect the TV from the mains power.
To completely disconnect the mains power, please remove
the mains plug from the mains socket or switch off the
POWER.ON/OFF
switch.
4..
The first time you turn the TV on, it will go straight into the
Initial.
Setup
menu. (If you have already installed the TV using the Quick
Start Guide, please go to the next step “
Selecting.the.Input.
Source
” at the bottom of next page.)
5..
Press the
OK
button to start the wizard.
To the mains socket
Please select your country:
Country
United Kingdom
Austria
Belgium
Croatia
Czech Republic
Denmark
Finland
aerial
7..
Press the
buttons to select the country where you will operate the TV
and then press the
OK
button to confirm.
9..
After finishing the Scan, press the
OK
button to complete the
process. An opening screen will be displayed.
L40DIGB20_IB_110106_Annie.indd 17
11年1月6日 下午5:37
