Logik L323ED11, Instruction Manual, Page: 26 / 64

26
GB
Cust
omising
TV S
ettings
Picture Setting
Allows you to set your preferred picture mode.
1.
Press the
Menu
button and then press the buttons to select the
PICTURE menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
2. Press the buttons to select the following picture options and then
press the
OK
button.
Picture Mode
Press the buttons to cycle among picture mode: Dynamic /
Standard / Mild / Personal and then press the OK button to confirm.
Alternative
You may press the
P
button once and then press the
buttons to select the picture mode directly.
Contrast
Press the buttons to adjust the difference between light and dark levels in the picture. (for
Personal mode)
Brightness Press the buttons to increase or decreases the amount of white in the picture. (for Personal
mode)
Colour Press the buttons to control the colour intensity. (for Personal mode)
Tint (For NTSC
format)
Press the buttons to adjust the balance between red and green levels.
(Tint is only available for NTSC signal input via the SCART or AV IN.)
Sharpness Press the buttons to adjust the level of crispness in the edges between light and dark areas of
the picture. (for Personal mode)
Colour
Temperature
Press the buttons to cycle among colour temperature: Cold /
Normal / Warm and then press the OK button to confirm.
Adjusts the colour components independently to achieve a warm or
cool. (for Personal mode)
•
Cold
: Increases blue tint
• Normal
•
Warm
: Increases red tint
Noise Reduction Press the buttons to select to reduce the noise level of the
connected device: Off / Low / Middle / High and then press the
OK
button to confirm.
Picture Mode
Dynamic
Standard
Mild
Personal
MENU EXIT
Colour Temp
Cold
Normal
Warm
MENU EXIT
Noise Reduction
Off
Low
Middle
High
MENU EXIT
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temp
Noise Reduction
Standard
50
50
50
50
50
Normal
Off
3D Type
PC SETUP
Off
Exchange 3D L/R L/R
2D to 3D Off
3D to 2D Off
L323ED11_IB_111011_Zell.indd 26 11/10/2011 9:18 PM