Logik L323ED11, Instruction Manual, Page: 18 / 64

18
GB
Initial S
etup
6.
Channel tuning will commence. This operation may take up to 10
minutes. The display will show the progress of the tuning and the
number of channels found.
7.
If you want to skip the ATV tuning, press the
Menu
button to interrupt
the tuning half way. A pop-up screen will be displayed, press the
button to select
YES
to confirm. You will then go straight to DTV tuning.
You may repeat the above step if you also want to skip the DTV tuning.
An installation reminder will appear the next time you turn on the TV.
8. After tuning is complete, the channels are arranged in the broadcaster's
preset order. If you wish to skip channels, modify the preset order or
rename channels, select
Channel Edit under the Channel menu (refer to
pages 22-23 for details).
Target Region Descriptor
During tuning your TV may have received signals from more than one
transmitter. If this has occurred the Target Region Descriptor screen will be
displayed. This will enable you to select the correct regional transmission for
the local news service that you require.
Press the buttons to adjust each option's setting and then press the OK
button to confirm.
Country Code
This will be shown as GBR for the UK.
Primary Region
This will show the regional country (England, Wales,
Scotland, NI).
Secondary Region
This will allow you to set the region for your local
news service on BBC and ITV (London, Beds and
Cambs etc).
Tertiary Region
You may receive signals from more than one
transmitter within the Secondary Region, (e.g Beds
and Cambs may have Luton or Sandy Heath).
Selecting the Input Source
1.
Press the
TV/AV
button at the front right side of the TV or the
Source
button
on the remote control to display the Input source list.
2.
Press the buttons to select the input source that you want: DTV / ATV /
AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB.
3. Press the OK button to confirm your selection. If you do not press the OK
button to confirm, the TV will automatically confirm the selected input
source within 4 seconds.
Channel Tuning
TV : 0 Channel
DTV : 0 Channel
Radio : 0 Channel
Data : 0 Channel
1 %... 471.25 MHz (TV)
Please press MENU key to skip
Target Region Setting
Country Code GBR
Primary Region England
Secondary Region
Tertiary Region London
In DTV mode, press the TV button to switch to TV / digital
radio channels directly.
Input Source
DTV
ATV
AV
YPBPR
HDMI2
SCART
HDMI1
PC
HDMI3
USB
L323ED11_IB_111011_Zell.indd 18 11/10/2011 9:18 PM