Logik L323CD11, Instruction Manual, Page: 6 / 64

GB
6
Pr
epar
ation
5. Mounting on the wall. This TV is designed to be wall-
mounted with a standard 400 mm x 200 mm mounting
kit designed for flat-panel TVs (sold separately). Mount
this TV according to the instructions included in the
mounting kit. Due to space restrictions, we recommend
that you make all connections (refer to pages 12-16 and
page 45 for details) before mounting on to the wall.
3. To install the base stand first make sure you position the
front of the base stand at the front of the TV. Slide the
base stand to the TV and then use the 5 screws to fix the
base stand to the TV.
4. To remove the stand assembly, lay the TV down on a flat
surface with the back side facing up. Please make sure
to place a soft cushioned material (such as a pillow or
thick piece of foam) beneath the screen. Untighten the 5
screws that hold the stand assembly to the rear of the TV.
Slide the base stand out.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side
facing up. Please make sure to place a soft cushioned
material (such as a pillow or thick piece of foam) beneath
the screen.
Installing / Removing the Base Stand
• In order to get the best 3D effect from your wall mounted 3D TV, we strongly recommend
that you use a tilting wall mount bracket. This will enable you to angle the TV direct at your
favourite viewing position.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK
Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Keep all the spare screws should you want
to use the base stand option.
The screw holes will only align if the front of
the base stand is at the front of the TV.
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with
it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
Remove the stand assembly before mounting the TV onto the wall.
screw
unscrew
Screws x 5
(P.N.: 119020013)
Screw A x 5
(P.N.: 119020013)
400 mm
200 mm
Four mounting holes
(size M4 screw)
L323CD11_IB_111011_Zell.indd 6 11/10/2011 9:14 PM