Logik L323CD11, Instruction Manual, Page: 17 / 64

17
GB
Initial S
etup
Do not connect the TV to the mains supply
until you have completed all the connections.
2. Connect the mains cable to the AC Power In located
at the rear of the TV and then connect to the mains
socket after you have completed all the connections.
3. Switch on the POWER SWITCH which is located at
the rear of the TV. At this stage, the TV switches to
standby mode. The red LED indicator will illuminate
on the front panel of the TV.
4. In standby mode, press the STANDBY button on the
TV or the button on the remote control to turn
the TV on. The LED indicator will change from red to
green.
Turning the TV on for the First Time
1. Connect one end of the RF coaxial cable to the aerial
socket on the wall and the other end of the cable to
the Aerial socket at the rear bottom of your TV.
5. The first time you turn the TV on, it will go straight into the First Time
Installation menu. Please ensure the aerial is plugged in and then press
the OK button. (If you have already installed the TV using the Quick Start
Guide, please go to “Selecting the Input Source” section on the next
page.)
Please ensure aerial is plugged in!!
Then press OK button to start
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The STANDBY button at the front right side of the TV or the button on the remote control is only used for
switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the
mains power, please remove the mains cable from the mains socket.
Initial Setup
The STANDBY button is located on the front
right side of the TV.
OFF
ON
HDMI1 HDMI2 HDMI3 VGA PC audio SCART
Digital
Audio out AV R in L in Aerial
AC POWER IN POWER SWITCH
Y Pr Pb Common Interface
USB
Headphone out L R
Audio out
OR
HDMI1 HDMI2 HDMI3 VGA PC audio SCART
Digital
Audio out AV R in L in Aerial
AC POWER IN POWER SWITCH
Y Pr Pb Common Interface
USB
Headphone out
L R
Audio out
RF coaxial cable
(not included)
L323CD11_IB_111011_Zell.indd 17 11/10/2011 9:14 PM